Specifications

Figures
xxxii
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
Figure 23-7 Resource Partitioning Between AutoRoute and VSI 23-18
Figure 23-8 Switch with Redundant Controllers to Support Master Redundancy 23-19
Figure 23-9 Service Template Overview 23-26
Figure 23-10 Service Template and Associated Qbin Selection 23-27
Figure 25-1 Typical ATM Hybrid Network using Virtual Trunks 25-3
Figure 25-2 Virtual and Physical Trunks on a BXM 25-5
Figure 25-3 BXM Egress VIrtual Interfaces and Qbins 25-6
Figure 25-4 Virtual Trunks across a Public ATM Network 25-7
Figure 25-5 ATM Virtual Trunk Header Types 25-9
Figure 25-6 Addition of Virtual Trunks Across a Public ATM Network 25-18
Figure 25-7 Virtual Trunks across a Cisco Wan Switching ATM Cloud 25-19
Figure 26-1 SONET Section, Line, and Path 26-3
Figure 26-2 APS 1+1 Redundancy 26-4
Figure 26-3 APS 1:1 Redundancy 26-4
Figure 26-4 APS 1+1 Redundancy, Installing APS Backcards in APS Redundant Backplane 26-6
Figure 26-5 SONET APS 1+1 Detail 26-7
Figure 26-6 SONET APS 1:1 Detail 26-11
Figure 27-1 Replication of a Root Connection into Three Leaves 27-4
Figure 27-2 Example of Traffic, One Root and Two Leaves 27-4
Figure 27-3 Adding Multicasting Connections 27-5
Figure 27-4 Multi-Segment Multicast Connections 27-6
Figure 27-5 Statistics Collection 27-6
Figure 28-1 Automatic Alarm Reporting 28-2
Figure 28-2 OAM Cells 28-14
Figure 28-3 Alarms 28-14
Figure 29-1 Network Loopback Paths 29-7
Figure 30-1 Unlatching the Air Intake Grille 30-3
Figure 30-2 Removing a Line Module 30-5
Figure 30-3 DC Power Entry Module with Conduit Box 30-6
Figure 30-4 AC Power Supply Assembly 30-7
Figure 30-5 Removing Blank Filler Panel (B side shown) 30-8
Figure 30-6 Card Slot and Fan Fuse Locations on System Backplane 30-11
Figure 33-1 Network Application 33-1
Figure 33-2 Front and Rear Panel Features 33-5
Figure C-1 B-ISDN Model C-1