Specifications

CHAPTER

21-1

Cisco BPX 8600 Series Installation and Configuration

Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001

Configuring ATM Connections

This chapter explains how to establish ATM connection services by adding ATM connections between

ATM service interface ports in the network using ATM standard UNI 3.1 and Traffic Management 4.0:

• ATM Connection Services

• Basic ATM Connection Procedure

• Traffic Management Overview

• ATM Connection Requirements

• ATM Connection Flow

• rt-VBR and nrt-VBR Connections

• ATM Connection Configuration

• Traffic Policing Examples

• Local Management Interface and Integrated Local Management Interface Parameters

• ATM Command List

ATM Connection Services

You establish ATM connection services by adding ATM connections between ATM service interface

ports in the network.

• on the BPX switch through cards configured for port (service access) operation:

–

BXM-T3/E3

–

BXM-155 (OC-3)

–

BXM-622 (OC-12) cards

• or on the MGX 8220 through the AUSM card for the MGX 8220

Frame relay to ATM network interworking connections are supported between either BXM cards to:

• the IGX

• the MGX 8220

• the MGX 8800

• or to FRSM cards on the MGX 8220