Specifications

15-14
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
Chapter 15 Connecting Temporary Terminal and Attaching Peripherals
Connecting Dial-In and Dial-Out Modems
Table 15-8 V.34R Auto-Dial Configuration (dial-out to customer service)*
Step Command Function
These configuration commands are for a V.34R modem that does not have a talk/data
pushbutton.
1. AT&F Initializes factory defaults.
2. ATL1 Modem speaker at minimum volume.
3. AT*SM3 Enables automatic MNP error correction.
4 AT*DC0 Disables data compression.
5. AT*SC1 Enables DTE speed conversion.
6. AT*FL1 Enables XON/XOFF flow control.
7. AT*SI1 Enables 5-minute inactivity disconnect.
8. AT&C1 DCD controlled by modem.
9. AT&D2 Modem disconnects when toggles DTR.
10. AT&V Verify entries.
11. AT&W Saves current settings to non-volatile memory.