Specifications

CHAPTER
12-1
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
12
Installing the T3/E3 Cable Management Tray
This chapter provides instructions for the installation of the optional cable management tray that you
can use to route cables in an open-rack, non-redundant configuration:
• Installation of Cable Management Tray
• RaisingTrayforAccesstoPEMs
• Installing BXM T3/E3 Cable Bracket
• Connecting Cables to BXM T3/E3 Cards
• Routing Cables from Cards through Cable Management Tray
• Tray Raised with Cables in Place
You will need to obtain the optional cable management tray kit and one each BXM T3/E3 cable bracket
kit for each BXM T3/E3 card.
Installation of Cable Management Tray
Installing Tray Brackets
Step 1 Obtain brackets and associated hardware from the kit.
Step 2 Install left and right brackets, using two nuts to secure each bracket, Figure 12-1.