Specifications

Contents
xviii
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
How VSI Channels Are Configured/Allocated 29-17
How Background Redundancy Channels are Allocated 29-17
How IP Channels are Allocated 29-18
How ILMI/LMI Channels are Allocated 29-18
How ILMI Channels are Allocated for VSI Partitions on Trunk Interfaces 29-18
How VSI Channels are Assigned for Interslave VCs 29-18
mc_vsi_end_lcn 29-18
num chans 29-18
How Port Group Enters the Channel Assignment Picture 29-18
cnfrsrc fails with “available channels is 0” 29-19
cnfrsrc fails with “Automatic Routing Management is currently using the channel
space”
29-19
Troubleshooting Commands 29-20
CHAPTER 30 Replacing Parts 30-1
Replacing a Front Card 30-1
Replacing a Line Module 30-3
Replacing a DC Power Entry Module 30-5
Replacing an AC Power Supply 30-7
Field-Installing a Second AC Power Supply 30-8
Replacing the Fan Assembly 30-9
Replacing the Temperature Sensing Unit 30-10
Replacing Card Slot and Fan Fuses on the System Backplane 30-10
CHAPTER 31 BPX Node Specifications 31-1
ATM Trunk Interface (BXM-T3/E3 Cards) 31-3
ATM Trunk Interface (BXM-15zM-622 Cards) 31-4
ATM T3 Trunk Interface (BNI-T3, LM-3T3) 31-5
ATM E3 Trunk Interface (BNI-E3, LM-3E3) 31-6
ATM OC3 Trunk Interface (BNI-OC3, LM-OC3) 31-7
ATM Service Interface (BXM-T3/E3 Cards) 31-8
ATM Service Interface (BXM-155 Cards) 31-8
ATM Service Interface (BXM-622 Cards) 31-9
ATM Service Interface (ASI-1, LM-2T3) 31-9
ATM Service Interface (ASI-1, LM-2E3) 31-10
ATM Service Interface (ASI-2, LM-OC3) 31-10