Specifications

CHAPTER

6-1

Cisco BPX 8600 Series Installation and Configuration

Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001

Installation Overview

This chapter is an overview of the configuration procedures in this manual:

• Summary: Installation Procedure

• Installation Sequence Flow

• Configuration: Lines, Trunks, and Connection

The installation tasks introduced here are explained in detail in subsequent chapters.

For a description of the commands used to initially set up a BPX switch, refer to the Cisco WAN Switch

Command Reference and Cisco WAN Switch SuperUser Command Reference.

For additional information on network management and the graphical user interface recommended for

configuring and provisioning, refer to the Cisco WAN Manager manual.

Summary: Installation Procedure

Step 1 Safety

Step 2 Site Preparation

Step 3 Unpacking

Step 4 Installing shelf in cabinet or rack

Step 5 Installing a Cisco 7200 or 7500 router on a BPX 8650

Step 6 Optional Cable Management Tray

Step 7 Verifying 9.6 or 19.2 Gbps Backplane

Step 8 UpgradingtoBCC-4Cards

Step 9 Installing APS Redundant Frame Assembly and Backcards

Step 10 Making T3 or E3 Connections

Step 11 Making a BXM OC3 or OC12 Connection

Step 12 Making a BXM T3/E3 Connection

Step 13 Setting up the BME OC-12 Port Loop

Step 14 Alarm Output Connections

Step 15 Attaching Peripherals

Step 16 LAN Connection for the Network Management Station