Specifications

4-11
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
Chapter 4 BNI (Trunk) Cards
OC-3, Line Modules (SMF, SMFLR, & MMF)
• Single-mode fiber intermediate range
• Single-mode fiber long range
• Multimode fiber backcard
The Line Modules connect to the BNI through the StrataBus midplane.
For connector information, refer to Figure 4-6 and Table 4-4 for the LM-OC-3-SMF and to Figure 4-7
and Table 4-5 for the LM-OC-3-MMF.
The LM-OC-3-SMFLR uses the same type of connectors as the LM-OC-3-SMF.
s
Table 4-4 LM-OC-3-SMF and LM-OC-3-SMFLR Connectors
No Connector Function
1 PORT FC-PC connectors for the transmit and receive OC-3 signal to/from ATM
trunk 1.
2 PORT FC-PC connectors for the transmit and receive OC-3 signal to/from ATM
trunk 2.
Table 4-5 LM-OC-3-MMF Connector
No Connector Function
1 PORT Duplex SC connectors for the transmit and receive OC-3 signal to/from ATM
trunk 1.
2 PORT Duplex SC connectors for the transmit and receive OC-3 signal to/from ATM
trunk 2.