Specifications

Contents
viii
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
Connecting Cables to BXM T3/E3 Cards 12-5
Routing Cables from Cards through Cable Management Tray 12-7
Tray Raised with Cables in Place 12-7
CHAPTER 13 Installing the BPX Switch Cards 13-1
Installing the Cards 13-1
Installing Front Cards 13-4
Installing Back Cards 13-6
Verifying 9.6 or 19.2 Gbps Backplane 13-7
Upgrading to BCC-4 Cards 13-9
Specifying Card Redundancy 13-9
Installation of APS Redundant Frame Assembly and Backcards 13-12
APS 1:1 Redundancy Installation 13-12
APS 1+1 Redundancy Installation 13-13
CHAPTER 14 Connecting Cables 14-1
Making T3 or E3 Connections 14-2
Making a BXM OC-3 or OC-12 Connection 14-4
Making a BXM T3/E3 Connection 14-6
Setting up the BME OC-12 Port Loop 14-8
Alarm Output Connections 14-9
CHAPTER 15 Connecting Temporary Terminal and Attaching Peripherals 15-1
Temporarily Connecting a Terminal or NMS to the Control Port 15-2
Powering Up the Control Terminal 15-4
Connecting a Network Printer to the BPX Switch 15-7
Auxiliary Port Parameters for Okidata 184 Local Printer 15-7
DIP Switch Settings for Okidata 184 15-7
Procedure to Attach a Local Printer 15-8
Connecting Dial-In and Dial-Out Modems 15-10
Motorola V.34R BPX Switch Dial-In Configuration 15-11
BPX Switch Auto-Answer (Dial-In to BPX switch) 15-11
Auto-Dial to Customer Service 15-13
Making External Clock Connections 15-16