Installation guide

9-3
Cisco 10000 Series Routers Line Card Hardware Installation Guide
OL-6773-04
Chapter 9 8-Port Fast Ethernet Half-Height Line Card Overview
LEDs
LEDs
The 8-port fast Ethernet half-height line card LEDs are shown in Figure 9-1.
Figure 9-1 8-Port Fast Ethernet Half-Height Line Card Faceplate Description
Table 9-3 provides a description of the 8-port fast Ethernet half-height LEDs.
1 Captive screws 4 Ejector levers
2 FAIL LED 5 ACT (active) LED—One LED for each port
3 Ports 0 to 7 RJ-45 jacks. Top Row, left to
right, 1, 3, 5 and 7. Bottom row, left to right
0, 2, 4 and 6.
6 LINK LED—One link detected LED for each
port
CISCO
10000
FAIL
76162
4
1
3
2
4
1
1
Link
Act
0
Link
Act
7
Link
Act
6
Link
Act
5
6
Table 9-3 LED Description
LED Label Color State Meaning
Fail Yellow Off Off when line card is working properly. Turns on for a few
second during line card power-on self test (POST), then turns
off when the line card is working properly.
On On when the line card POST fails.
Link Green On Lights when a valid Ethernet link is detected.
Off Off when there is no valid Ethernet link.
Act (active) Green On Lights to indicate there is activity on the link.
1
1. This behavior applies only to the 8-port fast Ethernet half-height line card.
Off Off when there is no activity on the link.
1