Installation guide

CHAPTER
9-1
Cisco 10000 Series Routers Line Card Hardware Installation Guide
OL-6773-04
9
8-Port Fast Ethernet Half-Height Line Card
Overview
This chapter describes the Cisco 10000 series 8-port fast Ethernet half-height line card (referred to as
the 8-port fast Ethernet half-height line card), and contains the following sections:
• Line Card Summary, page 9-1
• Software and Hardware Compatibility, page 9-2
• Line Card, Router, and Processor Compatibility, page 9-2
• LEDs, page 9-3
• Physical Specifications, page 9-4
• Slot Locations, page 9-5
• Cables, Connectors, and Pinouts, page 9-6
Line Card Summary
Table 9-1 8-Port Fast Ethernet Half-Height Line Card Summary
Product Number Description Minimum Cisco IOS Release
ESR-HH-8FE-TX= 8-port fast Ethernet half-height
line card
Initial Cisco IOS releases for PRE-1:
12.0(23)S and later releases of Cisco IOS 12.0S
Initial Cisco IOS releases for PRE:2
12.2(15)BX and later releases of Cisco IOS 12.2BX
12.2(28)SB and later releases of Cisco IOS Release 12.2(28)SB
12.3(7)XI and later releases of Cisco IOS 12.3 XI
For registered Cisco.com users, use Software Advisor to
determine the software releases for this line card.
ESR-HH-CARRIER= Full-length base carrier for
half-slot line card
12.0(23)S and later releases of Cisco IOS 12.0S
12.2(28)SB and later releases of Cisco IOS Release 12.2(28)SB
ESR-HH-COVER= Blank filler for half-height line
cards
—