Installation guide

Contents
viii
Cisco 10000 Series Routers Line Card Hardware Installation Guide
OL-6773-04
Telephone Wiring Guidelines 16-2
Preventing Electrostatic Discharge Damage 16-3
Laser/LED Safety 16-3
CHAPTER 17 Installing and Removing Line Cards 17-1
Handling Line Cards 17-1
Online Insertion and Removal 17-2
Preprovisioning Line Card Slots 17-3
Slot and Subslot Locations 17-3
Removing and Installing Line Cards 17-7
Removing the Cisco 10008 Front Cover 17-8
Installing Full-Size Line Cards 17-10
Replacement Installation Guidelines 17-10
Installing Half-Height Line Cards 17-16
Replacement Installation Guidelines 17-16
Installing the Half-Height Line Card Carrier 17-16
Installing a Half-Height Line Card Into a Carrier 17-21
Installing SFP Modules or GBIC Modules 17-26
Guidelines for Using SFP Modules or GBIC Modules 17-26
Installing an SFP Module or GBIC Module 17-27
Installing an SFP Module 17-28
Installing a GBIC Module 17-30
Attaching Cables 17-32
Attaching Multimode and Single-Mode Optical Fiber Cables 17-32
Attaching RJ-45 Ethernet Cables 17-35
Attaching the 24-Port Channelized E1/T1 Line Card Adapter Cable 17-36
Attaching Coaxial Cables 17-37
Attaching the 4-Port Channelized T3 Half-Height Line Card Optional Y-Cables 17-39
Configuration Summary 17-41
Using the Cable-Management Bracket 17-42
Removing an SFP Module or GBIC Module 17-43
Removing Full-Size Line Cards 17-46
Removing Half-Height Line Cards and Carrier 17-51
Removing a Half-Height Line Card 17-51
Removing a Carrier 17-55
Checking the Installation 17-58
Using show Commands to Verify Line Card Status 17-58
Using show Commands to Display Line Card Information 17-59