Installation guide

7-3
Cisco 10000 Series Routers Line Card Hardware Installation Guide
OL-6773-04
Chapter 7 4-Port Channelized OC-3/STM-1 Line Card Overview
Software and Hardware Compatibility
Software and Hardware Compatibility
To check the minimum software requirements of Cisco IOS software with the hardware installed on your
router, Cisco maintains the Software Advisor tool on Cisco.com. This tool does not verify whether line
cards within a system are compatible, but does provide the minimum Cisco IOS requirements for
individual hardware line cards, modules, or options.
Note Access to this tool is limited to users with Cisco.com login accounts.
To access Software Advisor, click Login at Cisco.com, type Software Advisor in the SEARCH box, and
click Go. Click the link for the Software Advisor tool.
Choose a product family or enter a specific product number to search for the minimum supported
software release needed for your hardware.
Line Card, Router, and Processor Compatibility
Table 7-2 shows the router model, line card, and processor compatibility.
LEDs
The 4-port channelized OC-3/STM-1 line card LEDs are shown in Figure 7-1.
Figure 7-1 4-Port Channelized OC-3/STM-1 Line Card Faceplate Description
Table 7-2 Line Card, Router, and Processor Compatibility
Line Card Cisco 10008 Cisco 10005 PRE-2 PRE-1 PRE
4-port channelized OC-3/STM-1 line card Yes Yes Yes Yes Yes
1 Fail LED 5 Ports 0–3
(TX in this illustration is to the left and RX to
the right for each port. When inserted, TX is
on top, RX on the bottom.)
2 Loop LED (ports 0 and 1) 6 Loop LED (ports 2 and 3)
3 Alarm LED (ports 0 and 1) 7 Alarm LED (ports 2 and 3)
4 CD (carrier detect) LED (ports 0 and 1) 8 CD (carrier detect) LED (ports 2 and 3)
126713
CD
ALARM
LOOP
2
3
0
1
2
3
CD
ALARM
LOOP
CISCO
10000
FAIL
ESR-4OC3-CHSTM1
5
1 2
7
6
8
3 4