Installation guide

17-18
Cisco 10000 Series Routers Line Card Hardware Installation Guide
OL-6773-04
Chapter 17 Installing and Removing Line Cards
Installing Half-Height Line Cards
Follow these steps to install the carrier into any slot of the Cisco 10000 series chassis:
Step 1 If you have not already done so, attach an antistatic wrist strap to your wrist and to an ESD socket on
the chassis, or to a bare metal surface on the chassis or frame (Figure 17-15 or Figure 17-16).
Figure 17-15 ESD Chassis Connection—Cisco 10008 Router
1 ESD socket
PROCESSOR ONLY
POWER
FAULT
MISWIRE
CISCO
10000
PERFORMANCE ROUTING ENGINE
SLOT 0
STATUS
FAIL
BITS
P/N
ESR-PRE3
PERFORMANCE ROUTING ENGINE
SLOT 0
STATUS
FAIL
BITS
P/N
ESR-PRE3
CH OC-12-DSO SM-IR
6XCT3–DS0
5
6XCT3–DS0
5
FAIL
6XCT3–DS0
5
6XCT3–DS0
5
6XCT3–DS0
5
OC–12/STM–4 POS SM–IR
126144
1