Installation guide

14-3
Cisco 10000 Series Routers Line Card Hardware Installation Guide
OL-6773-04
Chapter 14 1-Port OC-48/STM-16 Packet over SONET Line Card Overview
Line Card, Router, and Processor Compatibility
Line Card, Router, and Processor Compatibility
Table 14-2 lists the router model, line card, and processor compatibility.
LEDs
The 1-port OC-48/STM-16 Packet over SONET line card LEDs are shown in Figure 14-1.
Figure 14-1 1-Port OC-48/STM-16 Packet over SONET Line Card Faceplate Description
Table 14-3 provides a description of the 1-port OC-48/STM-16 Packet over SONET line card LEDs.
Table 14-2 Line Card, Router, and Processor Compatibility
Line Card Cisco 10008 Cisco 10005 PRE-2 PRE-1 PRE
1-port OC-48/STM-16 Packet over SONET
line card
ESROC48/P/SRPSMS=
Yes No Yes No No
1-port OC-48/STM-16 Packet over SONET l line card
ESROC48/P/SRPSML=
Yes No Yes No No
1 Captive screw 3 FAIL LED
2 Ejector lever 4 Port status LEDs:
SRP, POS, ENABLE
RX, TX, CD (carrier detect)
PASS THRU, WRAP, SYNC
ENABLE
POS
SRP
SYNC
WRAP
PASS
THRU
CD
TX
RX
76996
CISCO
10000
ENABLE
POS
SRP
FAIL
OC–48/STM–16 POS/SRP SM–LR
CD
TX
RX
SYNC
WRAP
PASS
THRU
TX
RX
1
2
1
2
4
3
Table 14-3 LED Description
LED Label Color State Meaning
FAIL Yellow Off The line card is operating properly.
On A major failure has disabled the line card.