Installation guide

CHAPTER
14-1
Cisco 10000 Series Routers Line Card Hardware Installation Guide
OL-6773-04
14
1-Port OC-48/STM-16 Packet over SONET Line
Card Overview
This chapter describes the Cisco 10000 series 1-port OC-48/STM-16 Packet over SONET line card
(referred to as the 1-port OC-48/STM-16 Packet over SONET line card), and contains the following
sections:
• Line Card Summary, page 14-1
• Software and Hardware Compatibility, page 14-2
• Line Card, Router, and Processor Compatibility, page 14-3
• LEDs, page 14-3
• Physical Specifications, page 14-5
• Slot Locations, page 14-6
• Cables and Connectors, page 14-7
Line Card Summary
The 1-port OC-48/STM-16 Packet over SONET line card provides a trunk uplink capable of supporting
up to 2.4 Gbps full duplex throughput over a standard SONET/ITU-T Synchronous Digital
Hierarchy (SDH) interface, using a single-mode fiber with SC connectors.
Table 14-1 1-Port OC-48/STM-16 Packet over SONET Line Card Summary
Product Number Description Minimum Cisco IOS Release
ESR1OC48/P/SRPSMS= 1-port OC-48/STM-16 POS/SRP,
single-mode, short-reach line card
Initial Cisco IOS releases for PRE-2:
12.2(15)BX and later releases
12.2(28)SB and later releases of Cisco IOS
Release 12.2(28)SB
12.2BX
12.2(28)SB and later releases of Cisco IOS
Release 12.2(28)SB
12.3(7)XI and later releases of Cisco IOS 12.3XI
For registered Cisco.com users, use Software Advisor to
determine the software releases for this line card.
ESR1OC48/P/SRPSML= 1-port OC-48/STM-16 POS/SRP,
single-mode, long-reach line card