Installation guide

xi
Cisco 10000 Series Routers Line Card Hardware Installation Guide
OL-6773-04
About This Guide
Document Revision History
The Document Revision History table, below, records technical changes to this document.
Audience
The Cisco 10000 Series Routers Line Card Hardware Installation Guide is written for the person who
installs, configures, and maintains a Cisco 10000 series router.
The user must be familiar with electronic circuitry and wiring practices and have experience as an
electronic or electromechanical technician.
Revisoin Date Change Summary
OL-6773-04 July 2007 Added 1000BASE-T SFP transceiver module for
Category 5 copper wire support for the 1-port Gigabit
Ethernet half-height line card.
December 2006 Added Performance Routing Engine 3 (PRE3) software
support information for the following line cards:1-port
OC-12 ATM, 1-port channelized OC-12/STM-4, 1-port
Gigabit Ethernet half-height, and 1-port Gigabit Ethernet.
OL-6773-03 May 2006 Added Coarse Wave Division Multiplexer (CWDM) Small
Form-Factor Pluggable (SFP) laser optical transceiver
module information.
OL-6773-02 March 2006 Added information about these line cards: 4-port
channelized T3 half-height and 4-port OC-3/STM-1 ATM
with long-reach optics.
OL-6773-01 July 2005 This document contains all of the Cisco 10000 series
routers line card information previously documented in
individual documents, including the Cisco 10005 extender
card and alarm card document.
Regulatory compliance and safety information has moved
to the new Regulatory Compliance and Safety Information
for the Cisco 10000 Series Routers.