Installation guide

10-7
Cisco 10000 Series Routers Line Card Hardware Installation Guide
OL-6773-04
Chapter 10 1-Port Gigabit Ethernet Half-Height Line Card Overview
Cables and Connectors
Figure 10-3 Line Card Slot and Subslot Designations for the Cisco 10005 Router
The 1-port Gigabit Ethernet half-height line card can be installed in any subslot in line card slot 1
through slot 5. The Cisco 10000 Carrier is used with the 1-port Gigabit Ethernet half-height line card.
Cables and Connectors
The 1-port Gigabit Ethernet half-height line card supports single Ethernet interfaces based on SFP
technology. The following SFP modules are supported by this line card:
• 1000BASE-SX SFP—The SFP-GE-S=, 1000BASE-SX SFP module operates on ordinary
multimode fiber-optic link spans of up to 550 meters in length.
• 1000BASE-LX/LH SFP—The SFP-GE-L=, 1000BASE-LX/LH SFP module operates on ordinary
single-mode fiber-optic link spans of up to 10,000 meters in length.
• 1000BASE-ZX SFP—The GLC-ZX-SM=, 1000BASE-ZX SFP module operates on ordinary single
mode fiber-optic link spans of up to 70 kilometers in length. Link spans of up to 100 km are possible
using premium single-mode fiber or dispersion-shifted single-mode fiber. The SFP module provides
an optical link budget of 23 dB—the precise link span length depends on multiple factors such as
fiber quality, number of splices, and connectors.
• 1000BASE-T SFP—The SFP-GE-T (1000BASE-T copper SFP module) provides full-duplex
Gigabit Ethernet connectivity to high-end workstations and between wiring closets over an existing
copper network infrastructure. The SFP-GE-T maximum cabling distance is 328 feet (100 m).
1 PRE slot A 4 Subslots 1/0 (top) to 5/0 (bottom)
2 PRE slot B 5 Subslots 1/1 (top) to 5/1 (bottom)
3 Line card slots 1 (top) to 5 (bottom)
132318
CISCO
10000
PERFORMANCE ROUTING ENGINE
FAIL
STAT U S
ACO
CRITICAL
MINOR
MAJOR
CONSOLE
ETHERNET
LINK
ACTIVITY
AUX
SLOT 0
SLOT 1
CISCO
10000
PERFORMANCE ROUTING ENGINE
FAIL
STAT U S
ACO
CRITICAL
MINOR
MAJOR
CONSOLE
ETHERNET
LINK
ACTIVITY
AUX
SLOT 0
SLOT 1
CISCO
10000
ENABLE
ALARM
LOOP
FAIL
OC-12/STM-4 ATM SM-IR
CARRIER
TX
RX
CISCO
10000
CARRIER
ALARM
LOOP
FAIL
6XCT3–DS0
0
1
2
3
4
5
CISCO
10000
CARRIER
ALARM
LOOP
FAIL
6XCT3–DS0
0
1
2
3
4
5
CISCO
10000
CARRIER
TX
RX
FAIL
OC-12/STM-4 POS SM-IR
CISCO
10000
CARRIER
TX
RX
FAIL
OC-12/STM-4 POS SM-IR
3
4
5
1
2