Specifications

2.0 Remote Site Management Solutions Offered By BayTech
Helping Network Managers Throughout the World
62
Summary: You noticed on the chart there are several usernames and passwords assigned to this unit. You
can go back and try any of these. The current reading tells you whether or not you can install more equipment
on this RPC3.
4.6 BayTech Demo Connections Chart
Use the BayTech Demo Connections Chart below as a reference when connecting to the units. The chart is divided
into five columns:
• Unit/Module: The Demo Units available. DS and M Series units are listed with thier modules. The RPC
units are listed with thier respective host ports. IP addresses and or phone numbers are listed for TELNET
or dial-up connections.
• Connected To: The device the peripheral module DS and M Series) or RS232 host (RPC Series) is
connected to. This could be an RPC or a module in either a DS or M Series unit.
• Strip (RPC 27): The RPC 27 that the unit is plugged into. There are 2 RPC 27 strips hanging rack side of
the demo units.
• Receptacle: The receptacle on the RPC 27 that the unit is plugged into.
• Misc Information: Miscellaneous Information about the product
Unit / Module Connected To Strip (RPC27) Receptacle Misc. Information
DS3
DS72 SNMP IP:(
209.205.132.26)
Console Port 4 V75
DS74
1. RPC27-20NC Console from Port 1
DS74
2. RPC27-20NC Console from Port 2
DS74
Empty
1 13 Changed attention character to
(commas),
DS2-RPC
DS72 IP: (
209.205.132.25)
·
Console Port 3 V75
DS74: No Connection
1 12 Changed attention character to
(quotation marks)”
DS4D-RPC
DS71-MD3: No Connection
DS72 IP: (
209.205.132.24)
·
Serial Port 2 on V75
DS74:No Connection
Empty
1 11 Changed attention character to
(colons):
RPC4-15
Onboard serial host Port 4 V74 2 14
RPC3-15
Onboard serial host Port 3 V74
Ethernet Port IP: (
209.205.132.23)
2 13
RPC-5
Onboard serial host Port 2 V74 2 12