Specifications

2.0 Remote Site Management Solutions Offered By BayTech
Helping Network Managers Throughout the World
51
A. Type [TELNET 209.205.132.23] and hit enter, if you made it through you firewall you will see the following:
B. You are “company1” , your username is “company1” and your password is “cp1” . Type these at the
appropriate prompt. You should see the following screen:
Discussion: Since you only have one receptacle assigned, only one is shown. You will also notice the “True
RMS current” reading. In a live situation this would show the current draw of the attached equipment.
C. The task is now to remote “YOURSERVER”. From the RPC-3> prompt type [reboot 1] , hit “y” to the “are
you sure questions”, your server is rebooted.
D. Type [logout] and hit enter to end the session.
4.3 Instructions for using the M6-DAC via the Internet
In this exercise you will connect via the Internet to the M6-DAC. This unit has 8 RS232 ports for console access expandable up
to 20 RS232 ports. One of the important things to note with the M series, is it’s ability to have concurrent sessions.