Specifications
2.0 Remote Site Management Solutions Offered By BayTech
Helping Network Managers Throughout the World
48
B. The menu indicates the Router is on port 3 of the four RS232 ports. There is not a live router on this
port. There is a loop back connecter, which allows you to see your keystrokes. Select option 3 of the
menu and hit enter. You should see the following after you type a few characters.
DISCUSSION: You are in full duplex communications with port 3, if this was a live device you would be
able to do remotely what you could do onsite through this console port.
To get back to the main menu you will type five semicolons. The main menu will appear.
C. Now we want to reboot the router. Menu option 5 provides access to the power control section of
the DS2RPC. Select this option and hit enter. You should see the following:
D. Type [reboot 3] hit enter, answer âyâ to the question. Your router is rebooted.
E. Type five semicolons to get back to the main menu, hit âtâ and enter to logout.