Specifications

2.0 Remote Site Management Solutions Offered By BayTech
Helping Network Managers Throughout the World
45
D. The username is “admin” the password is “bta”, enter these at the appropriate prompt an hit enter. You
should see the following:
DISCUSSION: Before proceeding lets discuss what you see in the screen.
1. Average Power, Apparent Power, True RMS Voltage, True RMS Current, Maximum
detected, Internal Temperature: All of the listed items are measured continuously and
reported when you display the screen. If you use the DS-Series SNMP controller these
items are reported when they exceed the specified threshold.
2. Outlet Circuit Breaker: This is reported “Good” when the breaker is okay, it would be
reported “Fail” if the breaker tripped. The logic of the RPC27 is fused so it will still be alive
even when the breaker trips.
3. 1)…EMAIL SERVER : This is the server causing problems, notice you can individually
name all outlets.
4. Locked: The RPC27 provides the option to lock individual receptacles, this is important if
there is equipment that should never be rebooted or turned off.