Specifications

2.0 Remote Site Management Solutions Offered By BayTech
Helping Network Managers Throughout the World
43
4.1 Instructions for connecting to the DS3-IPS via the Internet and
controlling the RPC27-20NC
In this exercise you will connect via the Internet to the DS3IPS. There are two RPC27’s
connected to the DS3-IPS. When you are finished you will have experienced the DS-Series
interface as well as the RPC27’s. You will also learn how to reboot all or individual receptacles
on an RPC27.
Possible live application: You have an email server in a remote location which is locked. You need to
reboot it
What you will need:
Any Telnet software (client) should work. Windows supplies a Telnet client with 95,98,NT and
ME. To access this go to the START menu, click RUN. It should look like:
A. Type [TELNET 209.205.132.26] and hit enter, if you made it through you firewall you will see the following:
B. The username is “admin”, type this and hit enter. You should see the following: