Specifications

2.0 Remote Site Management Solutions Offered By BayTech

Helping Network Managers Throughout the World

2.3.1 The correct questions for product selection

The DS-RPC has 4 power receptacles and is rated at 15amps; some of the models provide access to more than

four consoles. To expand the power receptacles your customer will need to use a product like the RPC4.

How many current and future RS-232 devices will the customer connect?

The DS-RPC is available in 3 different models. The model selected depends on how many RS-232 devices the

customer needs to connect and how the customer will access the unit. The table below explains the capabilities of

the 3 models. The DS74 module has four ports.

Model # Minimum RS-

232 Ports with

one DS74

Maximum

RS232 Ports

DS2-RPC– Single Host Unit

4 4 w/2 DS74’s

DS4-RPC– Single Host Unit

4 12 w/3 DS74’s

DS4D-RPC – Dual Host Unit

4 8 w/2 DS74’s

How will the customer access the unit?

Ethernet (Telnet), Dial-up, or local RS-232. The table below list the module part#’s needed for access.

How will the DS-Series be mounted?

The DS-Series ships with a 19” rackmount kit. 23” is available and should be specified at time of order.

Model#

Dual host units can

have two of the

following installed

Support

DS72TP

Ethernet (Telnet), RS-232

Port for local access or

use with external modem

for dail back-up

DS71-MD3

Internal 33.6kbps modem

and RS-232 port for local

access

DS71

RS-232 port for local

access or use with

external modem for dial

backup