Specifications

2.0 Remote Site Management Solutions Offered By BayTech
Helping Network Managers Throughout the World
31
2.2.1 The correct questions for product selection
How many current and future RS-232 devices will the customer connect?
The DS-Series is available in 5 different models. The model selected depends on how many RS-232 devices the
customer needs to connect and how the customer will access the unit. The table below explains the capabilities of
the 5 models. The DS74 module has four ports.
Model # Minimum RS-
232 Ports with
one DS74
Maximum
RS232 Ports
DS3IPS – Single Host Unit
4 8 w/2 DS74’s
DS6 – Single Host Unit
4 20 w/5 DS74’s
DS6D – Dual Host Unit
4 16 w/4 DS74’s
DS9IPS – Single Host Unit
4 32 w/8 DS74’s
DS9D – Dual Host Unit
4 28 w/7 DS74’s
How will the customer access the unit?
Ethernet (Telnet), Dial-up, or local RS-232. The table below list the module part#’s needed for access.
What are the voltage requirements for the DS-Series unit?
The DS-Series are available in 115VAC, 220VAC and –48VDC. Power requirements should be specified at time of
order. 115VAC is standard, 220VAC and –48VDC are optional and cost more.
Voltage Ordering and Cost
220VAC Option4 – $30.00
-48VDC Option1 – $80.00
How will the DS-Series be mounted?
The DS-Series ships with a 19” rackmount kit. 23” is available and should be specified at time of order.
Model#
Dual host units can
have two of the
following installed
Support
DS72TP
Ethernet (Telnet), RS-232
Port for local access or
use with external modem
for dail back-up
DS71-MD3
Internal 33.6kbps modem
and RS-232 port for local
access
DS71
RS-232 port for local
access or use with
external modem for dial
backup