Specifications

2.0 Remote Site Management Solutions Offered By BayTech
Helping Network Managers Throughout the World
28
2.1.3.12 RPC27 and RPC28 Remote Power Control
20 Amp Input with RPC27
30 Amp Input with RPC28
Power and Alarm
Indicators
Status LED indicate
the state of power to
the respective
receptacle.
One always-on
receptacle for use
with external
controller
Twenty fully
controllable
receptacles. Default is
on, in the event of a
RS-232 Control port for use with
BayTech’s DS-SERIES products or
any terminal server
Function: The RPC27 and RPC28 provide more
controllable receptacles then anything on the market.
Used with the DS-Series SNMP controller the RPC’s
provide receptacle level rebooting and on/off set
commands. SNMP traps can also be generated
based on preset current, voltage, power and
temperature thresholds.
To avoid overloading circuits unused receptacles
can be turned off.
Access: The RPC’s have a RS-232 control port for
use with the DS-Series SNMP controller, any terminal
server or external modem.
Control: The RPC’s accept on, off, reboot
commands for the whole strip, multiple receptacles or
individual receptacles. Configuration is menu driven
for setting thresholds and user information and
receptacle names.
• SNMP Support with DS-Series
controller
• 20 controllable Receptacles plus one
always on.
• Reboot or Turn ON/OFF all
receptacles
• True RMS current monitoring with
overload alarm buzzer and indicator
LED.
• Up to 9 users plus administrator with
capability of assigning receptacles to
users.
• User Name and password
authentication.
• Individual or collective control of the
receptacles.
• Programmable unit ID and receptacle
names.
• Voltage monitoring feature
• Temperature monitoring