Specifications

2.0 Remote Site Management Solutions Offered By BayTech
Helping Network Managers Throughout the World
27
RPC-22 (20 amp 115 VAC)
RPC-22A
(10 amp 230 VAC)
Features
• True RMS current, voltage and power monitoring.
• Supports up to 12 per strip for co-location environments.
• User Name and password authentication.
• Individual or collective control of the receptacles.
• Programmable unit ID and receptacle names.
• Voltage monitoring feature (not available on RPC-22a)
Note: These units are vertically mounted units. The photos
shown depict them sideways for a better view of the unit itself.
Function: The RPC-22 remote power switch
provides the means to turn On/Off, or reboot
equipment connected through the RPC. The RPC
has twelve individually (relay) controlled AC
power receptacles.
The RPC22’s allow you to monitor current,
voltage, power and temperature. When used with
the DS-Series SNMP controller multiple RPC22’s
can report alarms based on preset threshold.
Access: The RPC-22's EIA-232 port can be
connected to the DS-Series SNMP controller, any
terminal server or external modem for dial-up
access.
Control: The unit supports commands for both
receptacle control, status and configuration.
Commands include: on, off, reboot, config and
status. The unit provides a response to indicate
the commands were acknowledged and
completed.
Power Plug: 5-20P, Optional L5-20P (Twist Lock)
Interface 9600 bps, EIA-232, eight-pin RJ45 connector.
Environment Operating temperature range is from 0 to
40 degrees Celsius. Storage temperature range is from -
40 to 80 degrees Celsius. Humidity tolerance is from 5 to
95 percent RH.
Dimensions 1.75"w X 1.75"d X 56"h
Indicators Green power LED, green receptacle status
LED and red trip alarm LED
Mounting Vertical aligned on standard rack
Warranty One year on parts and labor
Specifics for 22:
Power Receptacles Twelve NEMA 5-15 receptacles
110V AC (+10%), 50/60 Hz, 20 Amps
Circuit Breaker 110V AC 20-Amps
Control The RPC-22A is controlled by simple
commands of ON, OFF and REBOOT. Access the units
internal menu through a serial connection either through
any of BayTech's DS Series data switches, or through
any terminal.
Specifics for 22A:
Power Receptacles Twelve IEC-320 receptacles 230V
AC (+10%), 50/60 Hz, 10-Amps
Circuit Breaker 230V AC 10-Amps
Control The RPC-22A is controlled by simple
commands of ON, OFF and REBOOT. Access the units
internal menu through a serial connection either through
any of BayTech's DS Series data switches, or through
any terminal.