Specifications

2.0 Remote Site Management Solutions Offered By BayTech
Helping Network Managers Throughout the World
25
2.1.3.10 RPC7 Vertical Mount Remote Power Control
The above view is two units stacked with the front view on top
and the rear view on bottom. This is not one unit.
Features
• Monitor AC TRUE RMS current
• Warns of over-current conditions with
audible signal
• 20 amp total support, 15 amps per
receptacle
• Twelve 115VAC receptacles
• Control receptacles via an EIA-232 port or
Ethernet 10BaseT connection
• Turn on/off individual or all receptacles
• Toggle power on individual or all
receptacles
• Circuit breaker trip status
• Retains receptacle status after power loss
• Receptacle logical names
Function: Now you can know the current load for all
circuits in your data centers. The RPC7-20 reports TRUE
RMS AC Current for connected equipment. The overload
audible alarm sounds when the preset threshold is
exceeded.
The RPC7-20 , with network access, provides the means
to turn On/Off, or reboot equipment connected through
the RPC. The RPC has twelve individually (relay)
controlled AC power receptacles that are easily
controlled by sending commands via Telnet, or via the
unit's EIA-232 control port
With Multiple user support, customers who co-locate
servers or other equipment with other companies can
provide power control to specific devices connected to
the RPC3.
Access: The RPC7 supports Telnet via Ethernet or has
an RS-232 ports for local access or us with and external
modem for dial backup.
Control: The unit supports commands for both
receptacle control, status and configuration. Commands
include: on, off, reboot, config and status.
Specifications:
Power Plug: 5-20P, Optional L5-20P (Twist Lock)
Power Receptacles: Twelve Nema 5-15R receptacles
Circuit Breaker: 120V 20Amp
EIA-232 Serial Port: One eight pin modular (RJ-45)
connector.
Network Interface: Ethernet, 10BaseT LOGICAL
NAME: Outlet 1 for receptacle 1, Outlet 2 for receptacle
2,…Outlet 12 for receptacle 12. Programmable up to 16
characters per receptacle.
Operating Temperature Range: 0 to 40degrees
Storage Temperature Range: -40 to 80 degree
Humidity: 5 to 95% RH
DIMENSIONS: 1.75"w x 3.75.d x 44"h
WEIGHT: 10lbs
INDICATORS: Power receptacle status, CX connection
status and diagnostics, RX & TX activity link
MOUNTING: Vertical with mounting kit
Warranty: One year - parts & labor