Specifications

2.0 Remote Site Management Solutions Offered By BayTech
Helping Network Managers Throughout the World
18
2.1.3.3 RPC3-15 and RPC3-20 Remote Power Control
Features
•
Monitor AC TRUE RMS current
•
Warns of over-current conditions with audible signal
•
RPC3-15 15 amp total support
•
RPC3-20 20 amp total support
•
Eight Nema 5-15R 115VAC receptacles
•
Control receptacles via an EIA-232 port or Ethernet
10BaseT connection
•
Reboot, Turn on/off individual or all receptacles
•
Receptacle logical names
Function: Now you can know the current load for all circuits in
your data centers. The RPC3-20 reports TRUE RMS AC
Current for connected equipment. The overload audible alarm
sounds when the preset threshold is exceeded.
The RPC-3 remote power switch, with network access,
provides the means to turn On/Off, or reboot equipment
connected through the RPC. The RPC has eight individually
(relay) controlled AC power receptacles that are easily
controlled by sending commands via Telnet, or via the unit's
EIA-232 control port
With Multiple user support, customers who co-locate servers or
other equipment with other companies can provide power
control to specific devices connected to the RPC3.
Access: The unit provides a 10BASE-T(twisted pair, RJ-45)
Ethernet interface. Network users access the unit by launching
a Telnet session from their workstations. The unit also has a
RS-232 port for configuration, onsite access or use with an
external modem for dial back-up.
Control: The unit supports commands for both receptacle
control, status and configuration. Commands include: on, off,
reboot, config and status. The unit provides a response to
indicate the commands were acknowledged and completed.
In the event of a power failure to the unit itself, the RPC-3
retains the most current operational status for each outlet in
non-volatile memory. When the RPC regains power, it restores
each outlet to those status settings. For example, if Outlet 1
and Outlet 2 are ON and the remaining outlets are OFF when a
power loss occurs, Outlet 1 & 2 will be placed in the ON
position automatically when power is restored.
The power-up routine to each receptacle is performed
sequentially to minimize power surges.
Specifications:
Power Plug: RPC3-15 5-15P ,
RPC3-20 - 5-20P, Optional L5-20P (Twist Lock)
Power Receptacles: Eight receptacles Nema 5-15R 15Amp
Circuit Breaker: RPC3-15 15 Amp, RPC3-20 20 Amp
EIA-232 Serial Port: One eight pin modular (RJ-45) connector.
Network Interface: Ethernet, IEEE 802.3 compliance,
10BaseT (twisted pair RJ-45);supports TCP/IP & Telnet
LOGICAL NAME: Outlet 1 for receptacle 1, Outlet 2 for
receptacle 2,…Outlet 8 for receptacle 8. Programmable up to
10 characters per receptacle.
Operating Temperature Range: 0 to 65 degrees C
Storage Temperature Range: -40 to 80 degree C
Humidity: 5 to 95% RH
DIMENSIONS: 16.73"w x 6.17"d x 1.72"h
WEIGHT: 4 lbs, 8 oz
INDICATORS: Power receptacle status, CX connection status
and diagnostics, RX & TX activity link
MOUNTING: 19" -or- 23" rack-mount or desktop, rack mount
kit are optional.
Warranty: One year - parts & labor
8 Nema 5-15
R receptacles
15 or 20
Amp Input
Network
Interface
RS-232
Interface
Status
LED’s