Specifications

2.0 Remote Site Management Solutions Offered By BayTech
Helping Network Managers Throughout the World
16
2.1.3.1 RPC2 and RPC2A Remote Power Control
Status LED’s indicate power state
RS232 Control Port 6 Power Receptacles
Features
• RPC2 6-Nema 5-15R 115VAC 15A Receptacles
• RPC2A 6-IEC320 C13 220VAC 10A Receptacles
• Turn on/off Individual or All Receptacles
• Reboot Power For Individual or All Receptacles
• Retains Receptacle Status During Power Loss
• EIA232 Control Port
• Secure Password Protection
• 15 Amp Power Rating
• User Definable Receptacle Names
Function: The RPC-2 remote power switch provides a
means to turn on, turn off, or reboot connected equipment,
from a remote location or local terminal . The unit contains
six individual relay controlled AC power receptacles that are
controlled by sending a short character string (command) to
the EIA-232 control port.
Access: The EIA-232 control port can be connected to any
BayTech data switch or terminal server for remote control.
Control: The RPC-2 supports commands for both
receptacle control, and status. These commands include:
on, off, config, reboot and status. The unit provides a
response to a command indicating that the command was
acknowledged and completed.
In the event of a power failure to the RPC, the unit retains
the most current operational status for each outlet in non-
volatile memory. When the RPC regains power, it restores
each outlet to those status settings. For example: if Outlets
1 and 2 are ON, and the remaining outlets are OFF when a
power loss occurs, when AC power is restored, Outlets 1
and 2 are placed in the ON position. The power-up routine
to each receptacle is performed sequentially to minimize
power surges.
Specifications:
POWER RECEPTACLES: RPC2: Six receptacles Nema 5-
15R, RPC2A Six receptacles IEC320 C13
Circuit Breaker: RPC2 125V, 15 Amp, RPC2A 240VAC,
10Amp
EIA-232 CONTROL PORT: Eight pin modular(RJ-45)
connector.
SECURITY: Password protection
DEFAULT LOGICAL NAME: Outlet 1 for receptacle
1,...Outlet 6 for receptacle 6. Programmable up to 10
characters per receptacle.
ENVIRONMENT: Operating temperature range: 0 to 70° C
Storage temperature range: -40 to 80° C Humidity: 5 to
95% RH
DIMENSIONS: 16.73"w x 5.25"d x 1.72"h
INDICATORS: One green power LED and six red LEDs
indicate receptacle on/off status
MOUNTING: 19" rack-mount or desk top
WARRANTY: One year--parts & labor