Specifications

2.0 Remote Site Management Solutions Offered By BayTech
Helping Network Managers Throughout the World
14
2.1.2.4 High Current Application with the RPC5-15 and RPC5-20
20 Amp Input
From High
Power
Equipment such
as routers or
switches
20 Amp
Output
RPC5-15 15 Amp Breaker
RPC5-20 20 Amp Breaker
Synopsis – Customer has 2 Cisco 6520 switches, which use up to 16 amps per power supply when fully
loaded. Customer needs the ability to reboot the switches when they lock up.
Features – Control of higher power equipment such as large routers and switches or servers. The
RPC5-20 provides In-band access via Telnet and supports up to 20 amps per receptacle.
Access and Control – The RPC5-20 has an Ethernet interface for Telnet access and a RS-232
interface for onsite access. The RS-232 interface can be connected to an external modem for dial back-
up.
FYI - Any of the four inputs power the logic of the RPC, power can be lost to all but one and the RPC
will remain active.
This version of the RPC is available in five different models.
RPC5-15 115VAC 15Amp Ethernet and RS-232 interface
RPC5-20 115VAC 20 Amp Ethernet and RS-232 interface
RPC6-15 115VAC 15 Amp RS-232 interface
RPC6-20 115VAC 20 Amp RS-232 interface
RPC6A-20 220VAC 20 Amp RS-232 interface, current, voltage and temperature monitoring