Specifications

2.0 Remote Site Management Solutions Offered By BayTech
Helping Network Managers Throughout the World
13
2.1.2.3 Network Power Management with RPC3-15, RPC3-20 or RPC3A
The RPC3-15, RPC3-20 and RPC3A are perfect stand
alone units providing power control for up to 8 devices.
Each RPC has it’s own IP and accessible via Telnet.
The RPC also has a local RS-232 console port for
onsite access or use with a modem for dial back-up.
Features – Control of 8 receptacles through direct
IP connection, current monitoring per circuit.
• Network Access Via TCP/IP (TELNET)
• Programmable Receptacle Names
• 8-115 or 230 VAC Receptacles
• Turn on/off Individual or All Receptacles
• Reboot Power For Individual or All Receptacles
• Retains Receptacle Status during power loss
• 10BASE-T Ethernet Control Port
• EIA232 Control Port for Local Access or Dial
Back-up With External Modem
• Secure Password Protection
• RPC3-15 , 15 Amp(115VAC)
• RPC3-20 , 20 Amp (115VAC)
• RPC3A , 10 Amp (230VAC)
8 Nema 5-15R
Receptacles
15 or 20
(115VAC)
Amp Input
Network
Interface
RS-232
Interface
Status
LED’s
RS-232 Status Network
Interface LED’s Interface
IEC320 C-13 IEC-320 C14
Outputs Input
(220VAC)
FYI…….
All BayTech 20 amp 115VAC power products are available with 5-20P or L5-20P power plugs. This
should be specified at time of order.
The RS-232 console port of any BayTech product can be used for onsite access or with an external
modem for dial back-up.