Specifications

2.0 Remote Site Management Solutions Offered By BayTech
Helping Network Managers Throughout the World
12
2.1.2.2 Data Center Power Management using the horizontal RPC4-20 with the DS-Series SNMP controller.
Synopsis – Customer has a rack of equipment
and needs power control and management.
Solution should be expandable for future growth.
Features – Control of 8 receptacles, current,
voltage, power and temperature reporting per
circuit. Solution is expandable to 8 strips or 64
receptacles.
SNMP Control and trap reporting – The DS-
Series controller shown provides complete
control and monitoring of the RPC’s connected.
SNMP traps based on current, voltage, power
and temperature can be generated and sent to a
central NOC
Reboot of turn on/off all or individual
components – Each receptacle can be
individually controlled. Group SNMP commands
can be generated for equipment with multiple
power supplies connected across multiple strips.
Current, Voltage and Power measurement per
circuit – True RMS measurement will provide
accurate readings per circuit. Preset Thresholds
generate audible alarms and SNMP traps when
reached.
Temperature measurement – SNMP traps are
generated based on temperature thresholds.
Local and Telnet control – The DS-Series
controller also supports Telnet access for remote
control and RS-232 console access for onsite
control or modem dial back-up.
BayTech components:
DS-Series SNMP controller –
1- (1) DS3-IPS
2- (1) DS72 Network/RS232 module
3- (1) DS74
4- (1) RPC4-20
FYI…….
All BayTech 20 amp 115VAC power products are
available with 5-20P or L5-20P power plugs. This
should be specified at time of order.
The RS-232 console port of any BayTech product
can be used for onsite access or with an external
modem for dial back-up.