Specifications

2.0 Remote Site Management Solutions Offered By BayTech
Helping Network Managers Throughout the World
11
2.1.2 Sample Power Management Applications
Most power management applications can be specified in different ways. The applications below indicate some of
the more standard configurations.
IMPORTANT: Do not hesitate to contact a BayTech applications engineer for recommendations.
SNMP applications require the DS-Series SNMP controller. The largest controller can handle up to 32 RPC’s. The
more strips a customer connects to a DS-Series controller, the lower the average cost per receptacle. Refer to the
product chart for units that can be used with the DS-Series controller.
2.1.2.1 Data Center Power Management using the vertical RPC-27 with the DS-Series SNMP controller.
Synopsis – Customer is in a data center
environment, needs power control and
management of several racks or enclosures.
Using rack space is not an option so the
solution should be vertically mounted.
Features – Control of 120 receptacles,
current, voltage, power and temperature
reporting per circuit. Vertically mounted using
no rack space.
SNMP control and trap reporting – With
the DS-Series, NOC’s have complete control
of the RPC’s. Traps based on preset current,
power, voltage and temperature are
generated. Traps are also generated on
receptacle and user activity.
Local and Telnet Interface – The DS-Series
supports Telnet and access for remote
control and has a RS-232 console port for
onsite access or use with an external modem
for dial back-up
Reboot or turn on/off individual
receptacles – all receptacles are individually
controlled. For equipment with dual power
supplies, group SNMP commands can be
sent to generate reboots over multiple strips.
Unused receptacles can be turned off to
avoid overloading circuits.
Temperature measurement – RPC’s have
an internal temperature sensor, which can be
used to detect temperature swings in an
enclosure. SNMP traps are sent to a central
NOC.
BayTech components:
DS-Series SNMP controller