Specifications

15
Interface Processor Installation and Configuration Guide
78-4211-02
Interface Processor Description
Specifications
The interface processor physical specifications are listed in Table 4.
FSIP
SSIP
VIP-4E/4T
2
VIP-4R/4T
2
X.21 high-density male DTE
X.21 high-density female DCE
EIA/TIA-449 high-density male DTE
EIA/TIA-449 high-density female DCE
V.35 high-density male DTE
V.35 high-density female DCE
EIA/TIA-232 high-density male DTE
EIA/TIA-232 high-density female DCE
EIA-530 high-density male DTE
E1-G.703/G.704 twinax 120-ohm balanced, 16.4 ft
E1-G.703/G.704 DB-15 120-ohm balanced, 16.4 ft
E1-G.703/G.704 BNC 75-ohm unbalanced, 16.4 ft
CAB-X21MT
CAB-X21FC
CAB-449MT
CAB-449FC
CAB-V35MT
CAB-V35FC
CAB-232MT
CAB-232FC
CAB-530MT
CAB-EI-TWINAX
CAB-EI-DB15
CAB-EI-BNC
HIP
3
Null modem, DTE, HSSI, 10 ft
Male to male, 10 ft
CAB-HNUL=
CAB-HSI1=
MIP or SMIP DSX1 to CSU DB-15 thru
DSX1 to CSU DB-15 null
E1 ISDN PRI, 10 ft
E1 BNC 75-ohm unbalanced, 16.4 ft
E1 DB15 120-ohm balanced, 16.4 ft
E1 TWINAX 120-ohm balanced, 16.4 ft
CAB-7KCT1DB15
CAB-7KCT1NULL
CAB-E1-PRI
CAB-E1-BNC
CAB-E1-DB15
CAB-E1-TWINAX
POSIP - User supplied
TRIP - User supplied
1. CIP2 models CX-CIP2-PCA1, CX-CIP2-PCA2, and CX-CIP2-ECAP1 ship with a cable that connects the CIP2 to cable CAB-PCA-VA
2. First generation VIP is no longer available. For informational purposes only.
3. The HIP uses the same cables as the PA-H and PA-2H port adapters.
Table 3 Cisco 7000 Series and Cisco 7500 Series Interface Processor Cables (continued)
Interface Processor Cable Description Part Number
Table 4 Interface Processor Specifications
Description Specifications
Physical dimensions The IP occupies one chassis slot and can only be operated in a Cisco
7500 series, or Cisco 7000 series routers using the 7000 Series Route
Switch Processor (RSP7000) and 7000 Series Chassis Interface
(RSP7000CI)
Shipping weight 5 lb (2.25 kg)
Operating temperature 32 to 104˚F (0 to 40˚C)
Relative humidity 10 to 90%, noncondensing
Storage temperature -4 to 149˚F (-20 to 65˚C)