Specifications

Contents

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for SCCP (version 3.0)

OL-4652-01

Installing the Cisco ATA 1

Network Requirements 2

Safety Recommendations 2

What the Cisco ATA Package Includes 2

What You Need 3

Installation Procedure 3

Power-Down Procedure 6

Configuring the Cisco ATA for SCCP 1

Default Boot Load Behavior 2

Specifying a Preconfigured VLAN ID or Disabling VLAN IP Encapsulation 3

Steps Needed to Configure the Cisco ATA 5

Basic Configuration Steps in a Cisco CallManager TFTP Server Environment 5

Basic Configuration Steps in a Non-TFTP Server Environment 6

Configuring the Cisco ATA Using a TFTP Server 7

Setting Up the TFTP Server with Cisco ATA Software 7

Configurable Features and Related Parameters 8

Creating a Cisco ATA Default Configuration File 9

Creating a Configuration File for a Specific Cisco ATA 11

Using atapname.exe Tool to Obtain MAC Address 13

Using Encryption With the cfgfmt Tool 13

Examples of Upgrading to Stronger Encryption Key 16

Configuring the Cisco ATA to Obtain its Configuration File from the TFTP Server 18

Using a DHCP Server 18

Without Using a DHCP Server 21

Voice Configuration Menu 22

Using the Voice Configuration Menu 22

Entering Alphanumeric Values 24

Resetting the Cisco ATA to Factory Default Values 24

Cisco ATA Web Configuration Page 25

Resetting the Cisco ATA Using Cisco CallManager 26

Upgrading the SCCP Signaling Image 27

Adding the Cisco ATA to the Cisco CallManager 1

Device Type Information 2

Adding Cisco ATAs Manually 2