Specifications

1-9
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for SCCP (version 3.0)
OL-4652-01
Chapter 1 Cisco Analog Telephone Adaptor Overview
Installation and Configuration Overview
Installation and Configuration Overview
Table 1-3 provides the basic steps required to install and configure the Cisco ATA to make it operational
in a typical Cisco CallManager environment.
Ta b l e 1-3 Overview of the Steps Required to Install and Configure the Cisco ATA and Make it Operational
Action Reference
1. Plan the network and Cisco ATA configuration.
2. Install the Ethernet connection.
3. Install and configure the other network devices.
4. Install the Cisco ATA but do not power up the Cisco ATA
yet.
Note If you power up the Cisco ATA before adding the
Cisco
ATA to the Cisco CallManager, you will need to
perform a reset once you have added the Cisco
ATA to
the Cisco
CallManager.
What the Cisco ATA Package Includes, page 2-2
Resetting the Cisco ATA U s i n g Cisco CallManager, page
3-26
5. Download the desired Cisco ATA release software zip file
from the Cisco web site, then configure the Cisco
ATA.
Chapter 3, “Configuring the Cisco ATA f o r S CCP”
6. Add the Cisco ATA to the Cisco CallManager. Chapter 4, “Adding the Cisco ATA to the
Cisco CallManager”
7. Power up the Cisco ATA .
8. Periodically, you can upgrade an individual Cisco ATA o r
all Cisco
ATAs to a new signaling image by using the
Cisco
CallManager administration web pages.
Chapter 7, “Upgrading the Cisco ATA Signaling Image”