Specifications

Index
IN-4
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for SCCP (version 3.0)
OL-4652-01
K
keepalive packets 5
L
line polarity 19
local tone playout reporting 10
low-bit-rate codec 5, 13, 16
low bit-rate codec selection (G.723.1, G.729) 8
M
MAC address 10, 13, 3, 4
converting to non-dotted hexadecimal 11
MAC addresses for both ports 13
MAC address fabrication 4
manually adding Cisco ATAs to Cisco CallManager 2
manually configuring the CA0orCM parameter 18
manually upgrading signaling image 4
maximum number of digits in phone number 18
maximum on-hook time 23
MediaPort parameter 14
MeetMe conference 4
message waiting indicator 17
mid-call service format 8
mid-call services
ATA style 6
Bellcore style 4
VG248 style 5
mid-call services style 22
minimum on-hook time 23
N
Named Signalling Event 8
name resolution 25
network configuration parameters 8
network connectivity parameters 21
Network Locale 5
network requirements 2
network router probing 24
network status 11, 12
NSE 8
NSE payload type configuration 21
O
obtaining network status 11, 12
OpFlags parameter 24
output level of FXS ports 20
outside dial tone 33
P
packet-precedence parameters 9
parameters and defaults xii, 1
parameters for configuring basic IP connectivity 23
parameter types 1
password
configuration 3
forgotten 3
password setting 23, 3
Phone Configuration screen 2, 4
phone number maximum digits 18
physical interfaces 2
physical specifications 1
polarity 19
Polarity parameter 19
polarity reversal before and after Caller ID signal 18
polarity settings for FXS ports 9
port enabling and disabling 13
port for debug messages
configuration 37
primary Cisco CallManager configuration 12
primary domain name server 10