Specifications

5-38
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for SCCP (version 3.0)
OL-4652-01
Chapter 5 Parameters and Defaults
Diagnostic Parameters
TraceFlags
Description
This parameter is for diagnostic use. Bit values are as follows:
• Bits 0 to 6—Reserved
• Bit 7—SCCP message log (set to 0 for a simplified log; set to 1 for a detailed log).
• Bits 8 to 31—Reserved
Value Type
Bitmap
Default
0x00000000
Voice Configuration Menu Access Code
313
Related Parameters
NPrintf, page 5-37
SyslogIP
Description
Use this parameter for diagnostic purposes; specify the IP address and port number to which the
Cisco
ATA should send its syslog output information.
The program prserv.exe, which is included in all Cisco ATA software upgrade packages, can be used to
capture syslog information if you do not have a syslog server.
Syntax
<HOST_IPaddress>.<HOST_PORT>
Example
If you want to send syslog information to the host at IP address 192.168.2.170 and port number 514, do
the following:
• Configure the value of this parameter as 192.168.2.170.514
• On your PC, run the command:
prserv 514
Value Type
Extended IP address
Default
0.0.0.0.514