Specifications

Appendix A Voice Menu Options
A-2
Cisco ATA 186 Installation and Configuration Guide
OL-1267-01
Dynamic Host Configuration
Protocol (DHCP)
0=Disable
1=Enable (Default)
20 This command controls whether the
Cisco ATA 186 can automatically obtain
configuration parameters from a server over the
network.
Diagnostic Information 411
DNS 1 IP 916
DNS 2 IP 917
Encrypt Key 320
Num Tx Frames
Values: 1 through 12
Default=2
35 Select the number of frames per packet to be
transmitted when using the audio codec G.723.1
or G.729A.
Gatekeeper ID 91 (H.323)
Gatekeeper/Proxy Server IP
Address
5 Enter the gatekeeper or proxy server IP address.
Gatekeeper time to live 250 (H.323) Enter the amount of idle time before the
gatekeeper times out.
Gateway IP Address 11 (H.323) Enter the IP address of the gateway. This
number can be automatically assigned when
DHCP is enabled.
IP Address 1 Enter the IP address of the Cisco ATA 186. This
number can be automatically assigned when
DHCP is enabled.
IP Dial Plan 310
LBR Codec 300
Login ID 0 46
Login ID 1 47
Media port 202 (SIP)
Network Route Address 2 Enter the network route address. This number can
be automatically assigned when DHCP is enabled.
Table A-1 Voice Menu Options in Alphabetical Order
Option Item Number Description