Specifications

Appendix B Parameters and Defaults
Operating Parameters
B-16
Cisco ATA 186 Installation and Configuration Guide
OL-1267-01
UDPTOS Bitmap The UDPTOS parameter specifies the
default IP precedence of UDP packets
as follows:
Bits 0-1: Unused
Bit 2: Reliability bit—1=request high
reliability
Bit 3: Throughput bit—1=request high
throughput
Bit 4: Delay bit—1=request low delay
Bits 5-7: Specify datagram
precedence. Values range from 0
(normal precedence) to 7 (network
control).
255 0x000000a0
UID0, UID1 Alpha-
numeric
string
User ID for line 0 and 1. 31 characters
or digits maximum.
UID0, 3
UID1, 13
0
UseLoginID Boolean 1 means use Login id specified in
LoginId0 and LoginId1 and 0 means
not.
For H323, this field is needed if autm is
set to 1.
For SIP, UID0 and UID1 will be used
for authentication if this is 0.
93 0
Table B-3 Common Operating Parameters and Defaults (continued)
Parameter
Value
Type Description
IVR Access
Code Default