Specifications

Cisco Aggregation Services Router (ASR) 900 Series Security Target
Page 8 of 52
1 SECURITY TARGET INTRODUCTION
The Security Target contains the following sections:
 Security Target Introduction [Section 1]
 Conformance Claims [Section 2]
 Security Problem Definition [Section 3]
 Security Objectives [Section 4]
 IT Security Requirements [Section 5]
 TOE Summary Specification [Section 6]
 Rationale [Section 7]
The structure and content of this ST comply with the requirements specified in the Common
Criteria (CC), Part 1, Annex A, and Part 3, Chapter 4.
1.1 ST and TOE Reference
This section provides information needed to identify and control this ST and its TOE.
Table 3: ST and TOE Identification
Name
Description
ST Title
Cisco Aggregation Services Router (ASR) 900 Series Security Target
ST Version
1.0
Publication Date
26 March 2015
Developer and
ST Author
Cisco Systems, Inc.
TOE Reference
Cisco Aggregation Services Router (ASR) 900 Series
TOE Hardware
Models
ASR 902 and 903 including the RSP (RSP1A-55, RSP1B-55, RSP2A-64 and RSP2A-
128) and 920 (ASR-920-12CZ-A, ASR-920-12CZ-D, ASR-920-4SZ-A and ASR-
920-4SZ-D)
TOE Software
Version
IOS-XE 3.13.(1)S
Keywords
Audit, Authentication, Encryption, Protection, Router, Traffic
1.2 TOE Overview
The Cisco Aggregation Services Router (ASR) 900 Series TOE are full-featured, modular
aggregation platforms. They are designed for the cost-effective delivery of converged mobile,
residential, and business services. The TOE provides scalable feature set of layer 2 switching and
layer 3 routing services, redundancy, low power consumption, and high service scale in routers
optimized for small aggregation and remote point-of-presence (POP) applications.
The TOE consists of any one of a number of hardware configurations as noted above in Table 3:
ST and TOE Identification. Each of the hardware configurations run the same version of IOS-
XE software. The Cisco ASR 902 Router uses the same design as the Cisco ASR 903 Router,