Specifications

Chapter 4 Configuring the Adaptive Security Appliance
Using the Adaptive Security Device Manager for Configuration
4-6
Cisco ASA 5580 Getting Started Guide
78-18101-01
d. Click Ye s to accept the certificates. Click Ye s for all subsequent
authentication and certificate dialog boxes.
e. When the File Download dialog box opens, click Open to run the installation
program directly. It is not necessary to save the installation software to your
hard drive.
f. When the InstallShield Wizard appears, follow the instructions to install the
ASDM Launcher software.
Step 2 From your desktop, start the Cisco ASDM Launcher software.
A dialog box appears.
Step 3 Enter the IP address or the hostname of your adaptive security appliance.
Step 4 Leave the Username and Password fields blank.
Note By default, there is no Username and Password set for the Cisco ASDM
Launcher.
Step 5 Click OK.
Step 6 If you receive a security warning containing a request to accept a certificate, click
Yes .
The adaptive security appliance checks to see if there is updated software and if
so, downloads it automatically.