Specifications

Chapter 3 Installing the ASA 5580
Installing the Chassis
3-8
Cisco ASA 5580 Getting Started Guide
78-18101-01
c. Repeat for each slide assembly.
Make sure the slide assemblies line up with each other in the rack.
d. Lift the spring latch to release the slide assembly if you need to reposition it.
• For threaded-hole racks:
a. Remove the eight round- or square-hole studs on each slide assembly using a
standard screwdriver, as shown in
Figure 3-6.
Note You may need a pair of pliers to hold the retaining nut.