Specifications

8-17
Cisco ASA 5580 Getting Started Guide
78-18101-01
Chapter 8 Scenario: IPsec Remote-Access VPN Configuration
Implementing the IPsec Remote-Access VPN Scenario
In Step 10 of the VPN Wizard, perform the following steps:
Step 1 Specify hosts, groups, and networks that should be in the list of internal resources
made accessible to authenticated remote users.
To add or remove hosts, groups, and networks dynamically from the Selected
Hosts/Networks area, click Add or Delete, respectively.
Note Enable split tunneling by checking the Enable Split Tunneling check box
at the bottom of the screen. Split tunneling allows traffic outside the
configured networks to be sent out directly to the Internet instead of over
the encrypted VPN tunnel.
Step 2 Click Next to continue.