Installation guide

Cisco AS5850 Universal Gateway Commissioning Guidelines

78-10537-04

How to Commission the Cisco AS5850 Universal Gateway

PEMF slot 25: AC Shelf is normal

PEMF slot 25: Blower is normal. (MBUS Port2 returns 8E)

Step 3 Check the Cisco IOS software image, uptime, and restart reason.

AS5850# show version

Cisco Internetwork Operating System Software

IOS (tm) 5850 Software (C5850-P6-M), Version 12.1(20000624:130156)]

Compiled Thu 20-Jul-00 09:11 by

Image text-base: 0x60008908, data-base: 0x612B0000

ROM: System Bootstrap, Version 12.0(20000306:065252) [gclendon-rsc-rommon 104],E

ROM: 5850 Software (C5850-BOOT-M), Version 12.1(20000624:130156) []

AS5850 uptime is 18 hours, 30 minutes

System returned to ROM by reload

System image file is "disk0:c5850-p6-mz"

cisco c5850 (R7K) processor with 229376K/32768K bytes of memory.

R7000 CPU at 262Mhz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3 Cache

Last reset from unexpected value

Channelized E1, Version 1.0.

X.25 software, Version 3.0.0.

Bridging software.

Primary Rate ISDN software, Version 1.1.

1 FastEthernet/IEEE 802.3 interface(s)

2 Gigabit Ethernet/IEEE 802.3 interface(s)

756 terminal line(s)

24 Channelized T1/PRI port(s)

1 Channelized T3 port(s)

507K bytes of non-volatile configuration memory.

Inspect the Feature Cards

To inspect the feature cards, perform the following steps.

Step 1 Verify that feature cards are up.

AS5850# show chassis

System is in classic-split mode, RSC in slot 6.

Slots owned: 0 1 2 3 4 5

Slots configured: 0 1 2 3 4 5

Slots owned by other: 8 9 10 11 12 13

Slot Board CPU DRAM I/O Memory State Elapsed

Type Util Total (free) Total (free) Time

0 24T1 0%/0% 0( 0%) 0( 0%) Booting 00:00:23

4 CT3_UP216 0%/0% 0( 0%) 0( 0%) Booting 00:00:23

5 UP324 0%/0% 0( 0%) 0( 0%) Up 00:00:01

System set for auto boot

Possible feature-card states include unknown, down, resetting, booting, and up. The Up state means that

a card can communicate with the RSC card.