Installation guide

41
Cisco AS5850 Universal Gateway Commissioning Guidelines
78-10537-04
How to Commission the Cisco AS5850 Universal Gateway
Step 4 Log on to the EXEC session.
This is a secured device.
Unauthorized use is prohibited by law.
User Access Verification
Username: theuser
Password:
Gateway>
Step 5 Determine upon which line the call landed. The following example shows that TTY line 436 accepted
the call. The call has been up and active for 20 seconds.
Gateway# show caller
Active Idle
Line User Service Time Time
con 0 admin TTY 00:13:43 00:00:00
tty 648 theuserTTY 00:00:20 00:00:08
Gateway# show caller user theuser
User: theuser, line tty 436, service TTY
Active time 00:00:34, Idle time 00:00:09
Timeouts: Absolute Idle Idle
Session Exec
Limits: - - 00:10:00
Disconnect in: - - 00:09:50
TTY: Line 1/00
DS0: (slot/unit/channel)=0/4/2
Status: Ready, Active, No Exit Banner
Capabilities: Hardware Flowcontrol In, Hardware Flowcontrol Out
Modem Callout, Modem RI is CD
Modem State: Ready
Gateway#
Step 6 Test the IP functionality to support shell sessions. From the universal gateway, Telnet to another device
in your network.
Gateway# telnet 172.22.66.26
Trying 172.22.66.26 ... Open
User Access Verification
Username: admin
Password:
Gateway#