Installation guide

Cisco AS5850 Universal Gateway Commissioning Guidelines

78-10537-04

How to Commission the Cisco AS5850 Universal Gateway

Note If the show chassis command reports that feature cards are booting for extended periods of time, start

debugging from the RSC card by using the following commands:

• debug dsip transport shows the registered MAC address sent from each feature card.

• debug dsip trace displays detailed DSIP hello and keepalive messages.

• debug dsip boot shows whether the RSC card is sending the boot image to the feature cards.

To learn more about these and other Cisco IOS commands, start at

http://www.cisco.com/univercd/cc/td/doc/product/software/ and click on your Cisco IOS release.

Use the DSIP Commands

The RSC card communicates with the feature cards using the following:

• Backplane MBUS

• Backplane packet bus

• Backplane Dial Shelf Interconnect Protocol (DSIP)

Note DSIP commands on the Cisco AS5850 function very much like the DSIP commands for the

Cisco AS5800. For the DSIP command reference and other system management functions, see Dial and

System Management Commands for the Cisco AS5800 at

http://www.cisco.com/univercd/cc/td/doc/product/software/ios113ed/113aa/113aa_2/58cfeats/

c5800uas.htm.

To use the DSIP commands, perform the following steps.

Step 1 To understand how DSIP functions, enter commands from the following example.

Note Output from the show dsi command differs from that for the show dsip command.

AS5850# show dsip

DSIP transport statistics:

IPC : input msgs=595876, bytes=54824426; output msgs=80748, bytes=4884676

total consumed ipc msgs=653; total freed ipc msgs = 653

transmit contexts in use = 10, free = 246, zombie = 0, invalid = 0

ipc getmsg failures = 0, ipc timeouts=0

core getbuffer failures=0, api getbuffer failures=0

dsip test msgs rcvd = 0, sent = 0

CNTL : input msgs=18800, bytes=1282416; output msgs=9585, bytes=5215320

getbuffer failures=0

DATA : input msgs=540, bytes=19440; output msgs=0, bytes=0

DSIP Private Buffer Pool Hits = 0

DSIP registered addresses:

Shelf0 : Master: 0044.efbe.3d37, Status=local

DSIP Clients:

-------------

ID Name