Specifications

• gain26(26dbGain)
• gain36(36dbGain)
• 15db(15dbpulse)
• 22.5db(22.5dbpulse)
• 7.5db(7.5dbpulse)
• 0db(0dbpulse)
Toconfigurecablelength,youmustbeinglobalconfigurationmode.listscommands
tohelpyouconfigureyourCT1linesusingthecablelengthcommand.
NoteWhenyouconfigureyoursystemforCT1lines,youmustalsoincludeadditional
commandstodefineframing,linecode,clocksource,signaling,etc.Forcomplete
instructionsonhowtoconfigureyourtrunkcardlines,refertotheCiscoAS5800
UniversalAccessServerSoftwareInstallationandConfigurationGuidethatshipped
withyoursystem.
Table15
Step Command Description
1
AS5800-1> enable
Password: password
AS5800-1#
Enterthe
enable
command.
Enteryour
password.
Youarein
privileged
EXECmode
whenthe
prompt
changesto
AS58001#.
2
AS5800-1# configure terminal
Enter configuration commands, one per line. End
with CNTL/Z.
AS5800-1(config)#
Enterglobal
configuration
modeby
typingthe
configure
command.
Theexample
isusingthe
terminal
configuration
option.
Youarein
global
configuration
modewhen
theprompt
changesto
AS5800
1(config)#.
3
AS5800-1(config)# controller t1 shelf/slot/port
Enter
controller
configuration
modeto
configure
your
controller
port.The
controller
portsare
labeled
shelf/slot/0
through
shelf/slot/11
ontheT3
cards.
4
AS5800-1(config-controller)#
cablelength short (133 | 266 | 399 | 533 | 655}
[or]
AS5800-1(config-controller)# cablelength long
{gain 26 | gain 36} {-15 | -22.5 | -7.5 | 0}
Enterthe
controller
cablelength
shortvalue
between0
and655
(feet).Enter
thecontroller
cablelength
longvalue
usinggain
andpulse.
ConfiguringChannelizedT1CableLength