Specifications

A-23
Cisco AS5800 Operations, Administration, Maintenance, and Provisioning Guide
DOC-7810814=
Appendix A Advanced Quick Reference
Advanced Quick Reference Configurations
Defines the authentication protocol (PAP) to be used for authenticating incoming calls only. The
USE-RADIUS list is defined in the AAA process. PPP clients must authenticate themselves using the
Password Authentication Protocol. Authentication will be done using the USE-RADIUS method list.
5800(config-if)# ppp multilink
Configures the interface for multilink. Enable this interface to negotiate PPP multilink.
5800(config-if)# exit
Exits interface configuration mode to global configuration mode.
5800(config)# dialer-list 1 protocol ip permit
Configures dialer-list 1 to consider all IP traffic as interesting.
To Modify, Copy, & Paste
interface dialer0
ip unnumbered loopback0
no ip directed broadcast
encapsulation ppp
no ip mroute-cache
dialer in-band
dialer idle-timeout 2700
dialer-group 1
ntp disable
no snmp trap link-status
peer default ip address pool default
no cdp enable
ppp authentication pap callin USE-RADIUS
ppp multilink
exit
dialer-list 1 protocol ip permit
IP Address Pools
Administratively defined numeric group of available internet protocol (IP) network device identifier.
Range of numeric IP addresses set aside for a specific allocation purpose, such as DHCP. As clients
connect to the Network Access Server (NAS), they request and are assigned an IP address from the
configured IP address pool.
IP Address Pools Requisites
The following requisites are significant considerations to identify before configuring an IP address pool:
• Local IP pools
• DHCP pools