Installation guide

12
Figure 15 Installing a Feature Card in a Cisco AS5400XM Universal Gateway
Step 3 Align the captive screws with their holes, and seat the card completely.
Step 4 Tighten the screws to secure the feature card to the chassis. (See Figure 16 and Figure 17.)
Figure 16 Tighten the Captive Screws on the Cisco AS5350XM Universal Gateway
Figure 17 Tighten the Captive Screws on the Cisco AS5400XM Universal Gateway
Step 5 Check the card LEDs to verify that the card is working properly. The following table summarizes the LED functions
for the feature cards.
37165
36817
0
Rx
ACT
2 PRI
OK
Tx
1
Carrier
card
DFC
Captive
screw
Captive
screw
Chassis
37170
Captive
screw
Captive
screw